Last updated
May 19th, 2012
Denovo's Pages - Simulated Sports Horseracing Downloads
Denovo's SimDosage Program Files
The SimDosage Tool displays the 3-generation lineage of any SIM horse a-la-PedigreeQuery.com and in addition calculates and displays its SimDosage (based on the 3-gen sire information the SIM provides) as well as CD and DI.
It will also calculate and display SimDosage, CD and DI for your Hypomates.
A 4-gen version will eventually be available.
The Tool requires the latest breeding.txt file in your folder C:\ENR to show the current SIM horse lineages
Download it HERE
Read about installation & usage
((If you are using this utility and are not on my mailing list, please mail me at the address below so I can add you)
SimDosage Program file (v0.95.05) - released Apr 5, 2005
The code is now rewritten so as to be future-proofed for further changes to the ChefTable and also works with more than 99999 horses
Previous version 0.94.2 was hard-coded to 200 Chefs only - the new code will work with any size of ChefTable
1) If you have not already done so,
download and install the original full v0.94 installation -
Note: If you experience difficulties installing the v0.94
download whereby an initial reboot to update system file MSVCRT.DLL
fails to install the file then refer to the procedure at the foot of
this page
2) Download from the link above and copy the program file SimDosage v0-95-05.exe to your SimDosage folder (should be C:\Program Files\SimDosage unless you changed it)
3) Redirect any shortcuts to point to the new version rather than v0.94.2
Download latest SimDosage Chef-de-Race table - requires program version 0.95.05 downloadable above
Unzip & copy the ChefTable to your C:\ENR folder - overwriting the previous version
Download latest SimDosage Sire List
Unzip & copy the SD_SireList to your C:\ENR folder - overwriting the previous version
====================================================================
RE: v0.94 FULL PROGRAM INSTALLATION DIFFICULTIES --- INSTRUCTIONS FOR
INSTALLING SIMDOSAGE where system file MSVCRT.DLL needs to be updated
=====================================================================
1) Locate the installation file downloaded from the link above: SimDosage v0-94 RELEASE.exe
2) Right click on the filename and choose Extract to Folder... (should be 3rd option down). This will extract all the installation files into a folder SimDosage v0-94 RELEASE within the folder you are currently in.
3) Open the folder - there are 4 files
4) Replace the file SETUP.LST with this one (unzip it first)
5) Run setup.exe -- this time when you are asked if you want to update
your system files, when you click OK, you should get a screen asking if
you want to reboot now. Do it !!
6) After reboot, the system files should be in place, and you can then
run setup AGAIN, when the program should be installed correctly.
7) Follow the instructions for downloading & placing the 3 files
SimDosage v0-95-05.exe, ChefTable and SD_SireList given above.
8) Make sure you have the latest breeding.txt file in your folder C:\ENR
Download it HERE
9) Run SimDosage v0-95-05.exe
Good luck at the tracks and in the breeding shed !!